H5ICAT AIR-TITE™ IC HOUSING
- Compatible Trims: 5010, 5010W, 5020BL, 5020SC, 5060P, 5070P.
- For insulated ceilings and direct contact with insulation
- AIR-TITE housing prevents airflow between attic and living areas
For installations where the housing will be in direct contact with ceiling insulation.
Integral thermal protector provides positive protection against over-lamping.
Meets restricted air flow requirements and prevents valuable energy dollars from being wasted.
- All housings are thermally protected.
- Socket snaps into trim for consistent lamp positioning.
- Junction box is approved for through branch circuit wiring and has seven 1/2" knockouts with true pry-out slots.
- Four Romex pryouts with integral strain relief to simplify Romex installation.
- Pre-installed, captive bar hangers allow housing to be positioned at any point within a 24" joist span.
- Score lines provided for easy field shortening for 12" joists.
- Unique arrowhead design provides “nailess” installation.
- Bar hangers can be repositioned 90° without tools on plaster frame.
- Hangers fit onto T-bar spline for quick alignment and can be permanently secured with optional TB-7 T-bar clips.
- 7 1/2" height allows use in 2x8 construction.
- Housing adjusts for ceilings up to 1 3/8" thick.
- Shipping insert protects socket from paint overspray.
- UL Damp location
- UL Feed Through
- CSA Certified
- UL listed for direct contact with insulation
- Meets State of California Title 24 requirements
- IP Rated
- Meets State of Washington Restricted Air Flow requirements
