STANDARD SLOPE:
2/12 to 6/12 PITCH (9° to 27°)
INCANDESCENT LAMPS
IC926
PRODUCT DESCRIPTION
- Slope ceiling IC Housing “Air-Loc® Ready”
- Energy efficient, sealed inner housing
- Double wall housing construction
- Can be completely covered with insulation
PRODUCT SPECIFICATIONS
Lamp
- Lamp ratings based on trim selected.
Socket
- Medium base porcelain with nickel-plated copper screw shell
- Adjustable to position lamp perpendicular to floor.
Labels
- U.L. listed for through-branch wiring, damp locations and IP.
- Product thermally protected against improper use of lamps
- Union made AFL-CIO
- UL Listed/CSA certified
Testing
- All reports are based on published industry procedures
- field performance may differ from laboratory performance.
- Product specifications subject to change without notice.
|
INSTALLATION
- Real Nail Bar Hangers Telescoping Real Nail system permits
quick placement
of housing anywhere within 24" O.C. joists, or
suspended ceilings
- Bars scored in two locations for fast clean
breaking allowing housing installation in tight applications
- Edge-mounted for extra strength and captive to mounting frame
- Features Real Nail captive nail system for quick one-step
installation
- May be installed either perpendicular or parallel to
junction box
- Oversized locking set screw locks fixture in position
or lock in place using locking notch.
Junction Box
- Pre-wired junction box provided with 5 1/2" and
1 3/4" knockouts
- 4 Romex connectors and ground wire, U.L.
listed/CSA certified for through-branch wiring
- maximum 8 No. 12 AWG 90° C branch circuit conductors (4 in, 4 out)
- Junction box provided with removable access plates
- Knockouts equipped
with pryout slots.
Mounting Frame
- 22-gauge die-formed galvanized steel
mounting frame
- 13 1/2" L x 9 1/4" W, (excluding bar hangers)
- Rough-in section (junction box, mounting frame, housing and
bar hangers) fully assembled for ease of installation.
Housing
- IC housing, .032” aluminum sealed for Air-Loc Ready
- Access door for junction box accessibility
- Inner housing is
vertically adjustable (up to 1 1/8") which allows housing to be flush
with ceiling.
- Designed to fit into 2 x 8 construction.
|
