H99T NON-IC HOUSING
- Compatible Trims: 993P, 993W, 999P, 996P, 998P, 990P, 951.
- For non-insulated ceilings or where insulation can be kept 3" from housing (U.S. only)
- Small 4 1/2" (144mm) aperture housing for providing accent and task lighting.
- Integral thermal protector guards against misuse of insulation materials and improper lamping.
- Junction Box is listed for through branch circuit wiring and has seven 1/2" knockouts and
four Romex knockouts with true pry out slots. - Romex knockouts include built in strain relief and require no additional clamps.
- Pre-installed, captive bar hangers allow housing to be positioned at any point within a 24" joist span.
- Score lines provided for easy field shortening for 12" joists.
- Unique arrowhead design provides “Nailess” installation.
Bar hangers can be repositioned 90° without tools. - Hangers fit onto T-Bar spline for quick alignment and can be
permanently secured with optional TB7 T-Bar clip.
- 5 1/2" Height allows use in 2"x 6" joist construction.
- Housing can be removed from plaster frame for junction box access.
- UL Damp Location
- UL Feed Through
- CSA Certified
- IP Rated
