H1T - 9" Non-IC Square Incandescent 120V
A versatile 8 1/2" square aperture fixture for use with 100W A19 incandescent lamps.
The H1T is complete with a built-in aluminum reflector, plaster frame, and feed-through
junction box. Suitable for either residential or commercial applications, the H1T provides
an economical housing choice with square trims.
Reflector
- One piece die formed 20 gauge aluminum reflector.
Plaster Frame
- 20 gauge steel
- Reflector adjusts 3/4" in plaster frame
Socket
- Porcelain socket with nickel plated screw shell for medium base incandescent lamps.
Bar Hangers
- Fully adjustable bar hangers span 24" joists.
- Housing may be positioned at any point along length of fully extended bars.
- May be repositioned 90 degrees
- Bar hangers fit into T-bar spine for quick alignment and may be permanently
secured with optional TB-7 T-bar grid clip (set of 4 sold separately).
Junction Box
- UL listed for through branch circuit wiring with eight no. 12 branch circuit conductors
suitable for at least 90 degrees C (four in, four out). - Six easy to remove 1/2" pryouts allow junction box access from top and sides.
- Four pryouts with integral strain relief simplify installation of non metallic sheathed cable.
Thermal Protector
- Provides protection against improper use of ceiling insulation.
Labels
- UL/cUL listed for damp locations
- UL/cUL listed for Feed Through
- IP rated
