IL336-AL Black
- Height: 8"
- Width: 5 5/8"
- 12 Volt
- 50W maximum
- PAR36 Lamp (included)
Housing – Single-piece PVC tube allows easy installation and water to run through
when installed on drainage material (gravel to be supplied by installer).
Straight cut end allows flush ground mounting, and an accessory lens guard (IL3H)
or rock guard (IG3H or IG30H) may be ordered separately, but is not required.
Angled cut end requires the top three inches installed above ground for
maximum vertical spot aiming with shielding being provided on three sides.
Lamp Holder (Patented) – Durable silicone rubber lamp holder has integral fins to allow
the height and angle of the lamp to be adjusted without any mechanical moving parts.
Fixture offers 360° lamp rotation and up to 45° off vertical
aiming adjustability, restricted only by the cut-off of the housing.
Finish – Black silicone lampholder with black PVC sleeve.
Lens – Optional lens available.
Socket – Double screw terminal.
Wiring – 4-ft. of 18-2 low voltage cable with a low voltage quick connector on one end for easy
energizing to the low voltage supply cable. Two spade connectors are provided on the
other end for easy lamp installation. One foot of the 18-2 cable should be left as
slack inside the PVC housing to allow easy lamp adjustment or removal.
UL, cUL Listed.
