3 3/4” Aperture Incandescent Standard Frame-In Kit
Features- Mounting Frame: .036" (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1" thick.
Push-in/twist-out rotoclips hold reflector flush to ceiling. - Junction Box: 4” x 3 1/2 x 2”: .063 (#14 ga.) galvanized steel. U. L. listed
for maximum of 8 No. 12 ga. 75° C
through branch circuit conductors (60° C end of run). Integral cable clamps permit attachment of
nonmetallic Romex® or armored cable without need of additional connectors. - Mounting Bars: .059” (#16 ga.) galvanized steel. 13” long bars extend to 27”,
with integral nailing tabs. Attaches to wood joist without need of accessories. - Socket Housing: Impact extruded aluminum or galvanized steel.
- Socket: Porcelain medium base; nickel plated screw shell.
Pre-wired with #18 ga. SF1 leads to junction box. - Thermal Protector: Meets NEC and UL requirements.
Insulation must be kept 3” away from fixture sides and wiring compartments
and must not be placed above fixture in a manner which will entrap heat.
