H27ICAT AIR-TITE IC HOUSING
6" Insulated Ceiling Recessed New Construction Housing
Compatible Trims: 310P, 310W, 426, 420P, 420W, 78P.
For use in insulated ceilings
For use in shallow ceilings
For use in insulated ceilings where 2" x 6" joist construction is used.
AIR-TITE housing prevents
airflow between attic and living areas
Integral thermal protector guards against overlamping.
Fixed socket bracket assures consistent lamp position.
Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts with true pry-out slots.
Plaster frame includes locking screw for hanger bars and cutouts for crimping bar hangers in position with pliers.
Pre-installed, captive bar hangers allow housing to be positioned at any point within a 24" joist span.
Score lines provided for easy field installation.
Bar hangers can be repositioned without tools.
Bar hangers fit onto T-bar spline for quick alignment and can be permanently secured with optional TB7 T-Bar clip.
Socket plug provides protection against paint overspray.
5 1/2" Height allows use in 2" x 6" joist construction.
Housing adjusts for ceilings up to 1" thick.
Housing adjustment screws can be tightened with flat blade screwdriver, Phillips screwdriver, wrench or nutdriver.
UL Damp Location
CSA Certified
IP Rated
Meets State of Washington
restricted Air Flow requirements
UL Feed Through
UL Listed for direct contact with insulation
Meets State of California Title 24 requirements
